• Functional Safety Manager / Engineer practice for IEC-61508 ? (E/E/PE)

• Coordinate the TÜV certification efforts

• Assist TÜV audits, provide deliverables to TÜV, assist teams to understand what is needed, and how to get there

• Assist and provide partially hands on support on: FSR, TSR, HW SR, SW SR, SW Design, all required tests, traceability

• Functional Safety Trainer and Manager role for recreational road vehicles and motor bikes

• HARA and Safety Goals development

• Functional Safety Manager role for complete EV functions + ADAS

• Safety Plan, DIA, HARA Hazard & Risk Assessment, Safety Goals, ASIL classifications

• FSC/FSR Functional Safety Concept, TSR Technical Safety Concept

• Functional Safety Project Manager for Chassis ECU

• CVC Combined Vertical Control

• Damping Control, Air Springs Control, Roll stabilization

• Support Systems, SW, HW and Test Engineers to comply with Functional Safety Requirements

• Prepare and recommend Release Recommendations and Safety Case

• Functional Safety Manager for all vehicle functions of a BEV Battery Electric Vehicle (E.GO Mobile J/V)

• Develop Item Definitions and Safety Goals for all functions following HARA ? S/E/C method. ASIL B / C / D.

• FSC Functional Safety Concept, Functional Safety Plan

• Coordinate with suppliers development of their FSC and FSR, review and agree

• Steering, braking, transmission, lights, washer & wiper. electric locks, power windows

• FuSa development for 3rd party BMS Battery Management System

• FuSa development for ZF ? TRW Steering, EPS, Steer by Wire products

• System architecture and HARA review, FTA

• Innovative new steering functions for rear wheels: AKC Active Kinematic Control (+/- 3 grade rotation)

• Use cases: Parking assistance, sharp turning at low speed, drive stability at high speeds

• Commercial vehicles, buses and trucks application
• Developed biker and pedestrian detection assistance systems, aftermarket application concept
• Assist technology and solutions review: radar, camera ultrasound solutions
• Review preliminary Functional Safety Analysis, FMEA / HARA
• Developed test specification based on BMVI (Germany) and UNECE (Europe) type approval requirements
• Developed bench-marking test specifications to cover all driving conditions and technologies
• Provide consultancy on ASPICE development
• Provide consultancy on supplier selection criteria and related international standards in automotive
• JIRA for project management, open points tracking and as document depository

• Automotive Lithium-Ion Battery Management System BMS - Functional Safety Manager

• Consultancy to development centers and the teams in USA, Europe and China

• Leading PORSCHE, DAIMLER, and FERRARI projects, supporting GM project

• Managing customers and suppliers? work packages

• Supporting Functional Safety Engineering and consultancy in detail provided

• Safety Plan, DIA Development Interface Agreements, Hazard & Risk Analysis, ASIL classification, DFMEA

• FSC Functional Safety Concept

• TSC Technical Safety Concept / TSR Technical Safety Requirements

• HW Analysis and Metrics, FTA, FMEDA

• Design and Work Product Confirmation Reviews

• Safety Verification and Validation Test, Safety Case

• Make Functional Safety Audits and Assessments

• Consultancy for Automotive Functional Safety Engineering

• Coaching and direction of internal and external Functional Safety Engineers

• Management and delivery of ISO-26262 Functional Safety Training

• Improvement of Functional Safety processes and tools

• Functional Safety Management tasks

• Functional Safety Audits

• ASPICE (Automotive SW Process Improvement and Capability Determination), Certified Provisional Assessor

• Safety Plan, DIA Development Interface Agreements, HARA, ASIL classification, DFMEA

• FSC Functional Safety Concept

• TSC Technical Safety Concept / TSR Technical Safety Requirements

• Functional Safety consultancy to Marquardt, A123 Systems, FCA, Volvo Geely, Brilliance, GAC, CATL

• Management of Automotive Functional Safety Engineering for Daimler, VW, GM, FCA, Maserati, Mazda, Volvo

• Gathering customer requirements, developing and management of Functional Safety Goals and Requirements for ADAS applications like Adaptive Cruise Control (ACC), Forward Collision Warning (FCW), Collision Mitigation Braking (CMB), Following Distance Indication (FDI), Lane Keeping Assist (LKA), Lane Centering Assist (LCA), and Lane Departure Warning (LDW)

• Camera Sensor, MobilEye, ADAS applications

• Safety Plan, DIA Development Interface Agreements, HARA, ASIL classification

• FSC Functional Safety Concept

• Providing FSC and decomposition solutions to OEM customers

• Improvement of Functional Safety Processes and tools

• Coaching and direction of internal and external Functional Safety Engineers

• Management and delivery of ISO-26262 Functional Safety Trainings

• Updating of TSC Technical Safety Concept of an BDC: Body Domain Controller for BMW

• DIA Development Interface Agreement with external Basis SW Component development, white box and ECU . level testing, delivered by 6 suppliers in 3 countries

• Safety Plan, HARA, ASIL classification, Technical Safety Requirements

• 12 main Safety Goals, ASIL-A and ASIL-B

• Train, supervise and coach 5 System Engineer in 2 locations to develop functions in 6 months

• Regular ISO-26262 development meetings with multiple BMW development teams in Munich by BMW

• Technical Coordination between DELPHI and AUDI for Hardware and Software Development

• Represent DELPHI in project meetings by AUDI

• Clarification and completion of customer requirements and specifications

• Assemble, test and deliver HW and SW for the first 300 first generation zFAS ECU's

• Coordination of OEM, Tier-1, Tier-2 matters (AUDI, Delphi, TTTEch, nVIDIA, MobilEye)

• Short term testing and reporting assignment to clarify issues between OEM and Tier-1

• Test driven on proving ground, data logged, evaluated, validated Radar and Camera based ADAS Advanced Driving Assist Systems and AEB Automatic Emergency Braking System for IVECO branded trucks

• Agile SW Development Project: ADSE Automated Driving in Special Environments

• Brake Control Unit software for automated driving and braking of vehicle. DOORS Requirements Engineering

• Embedded C-Programming. Eclipse IDE, PTC-Integrity / MKS (Archiving, Version / Change), base functions for automated driving

• Developing and coding ISO-26262 Functional Safety requirements

• Development coordination with: Basis Software Team, Communications, Diagnostics, HMI Human Machine Interface, Performance Software, Torque Management, EPB Electronic Park Brake, Test departments

• Testing of the SW functions and System Integration in Vehicle, Proving Grounds, Release Management

• Communication / Coordination with suppliers and customer

• EA-189 / Engine ECU development. The famous one with VW diesel scandal associated.

• Review applicable gasoline engine functions: fuel injection, air & fuel mixture, spark and ignition timing, combustion, Lambda-Control, emissions control, mathematical models and calculations

• OBDII ? Engine Management System

• OBDII ? Emissions Management System

• C-Embedded SW Review

• Diagnosing and solving functional problems in an Automotive Gasoline Engine ECU

• Defining alternative solutions

• Functional Safety Engineering: ISO-26262

• High Voltage Electrical Omni-Bus Powertrain ECU Electronic Control Unit Development

• Electrical Powertrain System Integration

• Functional Safety ISO-26262 Engineering, Hazard Analysis & Risk Assessment, FMEA, FTA, Safety Goals, ASIL classification (ASIL-B), Technical Safety, preparation of an AUTOSAR specification covering the latest topics of AUTOSAR SW based on products of leading AUTOSAR suppliers: Elektrobit, KPIT, Vector Informatics

• Electro Vehicle ECU Development and Testing, Project Management with internal departments and suppliers System Requirements Engineering and Management, Writing Specifications in DOORS for HW & SW units: ECU / Flash Boot Loader / AUTOSAR

• ECU Function Development: MATLAB, Simulink, State Flow, Embedded Code Generator Rapid Prototyping Development: dSPACE Control-Desk and MABX Micro Auto Box Commercial Vehicle CAN Bus Architecture Development conforming to J1939

• Electrical Vehicle, Electro Powertrain System Integration. High Voltage Battery, Inverters, ECU Electronic Control Unit, Electric Motor, Energy Recuperation, Onboard Charging, Diesel Generator Range Extender, test driving, measurements, data logger, evaluation of test drive data.

• Test and Measurement Engineering for ADAS Advanced Driver Assistance Systems: close & far distance radar,video & camera technology, parking assistance, adaptive cruise control (ACC / distronic plus), forward collision warning, pre-safe brake, stop & go function, ESP, lane departure warning / lane keeping, active blind spot assist, driver drowsiness detection, attention assist, side wind assist.

• Build complex test vehicles with latest Measurement Systems and Equipment according to Customer Requirements: Computers, Sensors, Date Loggers, Electronic Control Units, Cameras, Radars, Wireless Networks, GSM & UMTS Telecommunication Systems, Remote Monitoring

• Installation and Commissioning of Test Systems in Development and Test Vehicles for Test-Drives, Measurements, Data Collection, Data Evaluation and Release Management.

Automated Measurement Project Management:

• Programming (Triggers, Histograms, C-programming) and Testing-PROVEtech

• Measurements,FlexRay, CAN, CANape, CANalyzer, XCP (Bosch, TRW, Autoliv, Vector), Axis Video Server, Restructuring of CAN and FlexRay networks and AUTOSAR Database development

• Maintenance, diagnostic and repair of instrumentation and extensive measurement systems, hardware, software, firmware flashes, configurations for E-Class and S-Class Mercedes-Benz platforms.

• Test Drives on Proving Grounds for System Validation of latest ADAS Technology on S-Class Development vehicles. Diagnosing of problems encountered during tests, and Modification of Test & Measurement HW / SW Systems on the spot for accommo dating new requirements during proving ground tests missions.

• Mbtech Proving Ground: Papenburg, Germany

• Idiada Proving Ground: Santa Oliva ? Spain

• FB2 Driving License for Mercedes for Benz development vehicles on public roads & test grounds

• Mercedes-Benz M-Class and R-Class 2012 new model OEM production vehicles
• Implemented computer system controlled system final tests, trouble shoot electronic & mechanic failures.
• Utilised manufacturer documentations / CAN Bus and hand held diagnostics computers.
• Repaired electrical and mechanical problems in EAK (Automotive End Control) department.
• Trouble shooting: ADAS Advanced Assistance Systems, proximity sensors, acoustic signals, vision cameras.
• Tested, diagnosed, repaired: Electrical wiring and component problems, Instrumentation Clusters, Cockpit / Sound Systems / Camera Systems, malfunction of Safety Systems (TRW Airbags and Active Restraint Belts), Faurecia seat systems, drivers? seat control units, lighting and beam control, rattling issues of central consoles, circular control / navigation unit for the controls in the navigation / display system of the cockpit, TPMS Tire PressureManagement System,EIS Electronic Ignition System, HVAC Control Modules.
• Cooperated with in house and external HW and SW teams, provided technical support.
• Worked in coordination with Daimler, TRW, Faurecia, and MBTech Teams (OEM and Tier-1)

• Rechner gesteuerte Tests in EAK End Automobil Kontrolle Abteilung.
• Diagnose von Fehlern mit Hersteller Dokumentationen / CAN-Bus / Diagnose-Computer, und Reparatur.
• Reparatur von elektrischen und mechanischen Probleme in EAK (Automotive End Control)-Abteilung.
• Fehlersuche: FAS Fahrer Assistenz Systeme, Näherungssensoren.
• Testen, Diagnose, Reparatur von Instrumentation Cluster, Cockpit / Soundsysteme / Camera Systems.
• Fehlersuche: Störung der Sicherheitssysteme, Fahrer-Sitz-Steuerung, Beleuchtung und Lichtverteilung, Fehlfunktionen, Geräusch Probleme der Mittelkonsolen, Navigation-Einheit für die Kontrollen in der Navigation / Display-System des Cockpits, TRW Airbag-Module, TPMS-Reifen Druck-Management-System, EIS elektronische Zündanlage, HVAC Control Modules, Faurecia Sitzsysteme.
• Zusammenarbeit mit Daimler, TRW, Faurecia, und MBtech Team?s (OEM und Tier - 1)

• Strategisches Management
• Verwaltung aller kaufmännischen und technischen Betriebsabläufen
• Pflege aller Beziehungen zu Geschäftspartnern, Kunden und Lieferanten
• Beobachtung des Marktes und Kreditgeschäfte
• Verwaltung von Vermögen, Inkasso und Auszahlungen
• Management von Personal und ICT Leistungen
• Beschaffung neuer Mitarbeiter und Training
• Buchhaltung und Rechnungserstellung
• Einführung von Sparmaßnahmen und Controlling
• Voranmeldung und Abführung für die Umsatz- und Lohnsteuer
• Erstellung und Offenlegung des Jahresabschlusses
• Abgabe der Jahressteuererklärungen

• Unternehmensdienstleistungen zu KMU (Kleine und Mittlere Unternehmen) für die wirtschaftliche Entwicklung der Region.
• Hierbei folgende Aufgaben:

Business Consultant/Berater:

• Beratungsleistung für mehr als 100 KMU aus verschiedenen Industrien
• Strategisches Management, Business Planning, Business Development:
• Marketing, Internationalisierung, Export, Handel, Vertrieb, Sales Managemen
• Financial Management, IKT Management
• Produktions- und Qualitätsmanagement

Industrial Cluster Project Manager:

• Schuh Cluster Projektentwicklung, Management und Leadership:
• Etablierung einer int. Handelsgesellschaft von 12 Schuhherstellern inkl. Fundraising von staatlichen und privaten Sponsoren für die Teilnahme an int. Schuh-Messen
• Produkt Entwicklung, Marketing- und Messenaktivitäten
• Gewinnung neuer national und internationalen Großkunden

Unternehmertum Program Manager und Trainer:

• Entwicklung und Präsentation von 5-tägigem Kurs "Unternehmertum und Existenzgründer":
• „Business Plan und Strategie, Marketing, Sales, Finanzverwaltung“
• 300 Teilnehmer zertifiziert aus IHK-Mitgliedern, potenzielle Unternehmern und Universitätsstudenten: 6 Städte, 10 Runden jeweils 5 Tage

Completed 6 months of training in classroom in the college & practice in job placement on:

• A8-Engine Performance Course
• L1-Advanced Engine Performance Course
• A6-Automotive Electronics Course
• BasicClean Air Car Course-Advanced Clean Air Car Course
• OBD II Update Training-BAR 97 Transition Course
• Smog Certification Update Courses California State Examination and Licensing as Advanced Emissions Test and Repair Technician
• Performed hands-on tests, diagnostics, repairs and certification on more than 10,000 vehicles
• Expert on torque management, fuel management, air management, carburation, lambda control, catalytic converter,emissions (NOx, CO, HC, CO2, O2), engine thermo dynamics, heat control
• Expert on all sensors, actors, computer control units (PCM / ECU, etc.) & diagnostics tools (OBDII, Scantools), OBDII calibration, OBDII monitors, diagnostics with OBDII, handling OBDII error cases
• Expertise on diagnosing any electrical function or communication problem, electronic component & system failure, test & repair using manufacturer?s manuals or by experience
• Able to build test set ups, develop strategies to locate issues, develop tools and solutions
• Experience for most electro-mechanical systems and parts for most makes and models

6 Monate Ausbildung im Klassenraum an der Hochschule und in der Praxis:

A8 - Engine Performance Course

• L1 - Advanced Engine Performance Course
• A6 - Automotive Electronics Course
• Basic Clean Air Car Course // Advanced Clean Air Car Course
• OBD II Update Training // BAR 97 Transition Course // Smog Certification Update Courses

• Erwerben von Kalifornien staatlicher Lizenz zum Abgasen
• Testen und Emission Systems Reparatur und Zertifizierung.
• Eröffnung eines staatlich lizenziertes Test, Diagnose & Reparatur Unternehmens.

• Testen, Diagnose, Reparatur und Zertifizierung von mehr als 10,000 Fahrzeuge.
• Experte für alle Sensoren, Aktoren, Steuerungen Computer (PCM / ECU, etc.) & Diagnose-Tools (OBDII, CAN, usw.)
• Experte für OBDII Kalibrierung, OBDII Monitore, OBDII Diagnose, Behandlung OBDII Fehler Fälle.
• Experte zur Diagnose der elektrischen Fehlfunktionen oder Kommunikationsprobleme, elektronisches Bauelement & Systemausfall, Test und Reparatur mit Hersteller-Handbüchern oder Erfahrung.
• Erfahrung mit den meisten Elektro-Mechanische Systeme und Bauteile für die meisten Automobil Marken & Modelle.

• IKT-Technologien und Anwendungen
• Webseitenprogrammierung für Multiple Listing Service, HTML, ASP, CSS, JavaScript
• Datenbank Entwickler und Datenbank Programmierer, MS Access, SQL Scripting

• Programming website for MLS Multiple Listing Service for real estate listings
• Florida State License as Real Estate Sales Agent
• Database Developer and Database Programmer for real estate websites
• HTML, ASP, CSS, JavaScript, Basic Script, SQL Programming

• Ländervertretung für die Türkei von Siemens und Maxon (UK)
• Entwicklung von Business Plan und Strategie
• Marketing und Sales Management
• Technische Projekt- und Applikationsentwicklung
• Entwicklung und Training von VAR Value Added Resellers
• Projekte: GPS Flottenmanagement, PDA Mobil Applikationen
• Salespersonal Training, Coaching

• Prototype bus development for a new market:
• Lead a group of engineers from research & development, planning, production and sales departments
• Lead the development of new bus specifications and the making of the prototype
• The result was a complete acceptance by the target customers.

Project Manager:

• Planning, installation, modernization and management of existing and new:
• IT-and Telecommunication Networks including new Satellite Network to German headquarters
• Business-TV, Voice and Data Integrated Networks

• Selected to Mercedes-Benz Management Trainee Program as one of the three Trainees among 200 applicants in a unanimity voting of 7 Directors of the company (the only Engineering Management Trainee in the program).

• Under coaching of department directors:
• Research & Development, Planning, Manufacturing, Quality Assurance, IT and Telecom (ICT) Department

• Electrical systems failure in city busses delivered to Russia: studied problems, presented solutions to directors
• Seats mounting back logs: performed root cause analysis, improved processes, proposed solutions
• Lean production management at suppliers: audited supplier’s systems, suggested improvements
• Streamlining cable manufacturing process: audited processes, reorganized assembly steps, saving time & work.
• Quality problems in bus body painting: classified the problems, found causes

• Coordinated inter department meetings:
• Managed weekly manufacturing, logistics, quality, sales commitment meetings, controlled the works each week performed by departments, addressed the shortcomings and assigned corrective measures

Bus und LKW Hersteller, OEM:

• Management von Prototype Bus Entwicklung für Auslandsmarkt, Projekt in Fahrzeugneuanlauf
• Führung von Ingenieuren in Team für Design, Produktion und Qualitätskontrolle
• Planung, Installation, Standardisierung und Management neuer und vorhandener:
• IT- und Telekommunikations-Netzwerke
• Business-TV, und Voice & Data Integrated Network Projects

Engineering Management Trainee - Mercedes-Benz Turk

Projektarbeiten in den Abteilungen:

• Forschung und Entwicklung, Planung, Produktion, Qualitätssicherung
• Marketing und Vertrieb, Finanz und Controlling, Service, IKT / EDV
• Elektrische Probleme in Busse verkauft zum Russland
• Back-Logs in Sitze für Produktion
• Lean Produktions- und Qualitätsmassnahmen in Lieferanten
• Kabelmontage Continuous Improvement
• Problembehandlung in Paint Shop

• Umfangreiche Erfahrung in Automobil Produktion, Qualitätsmassnahmen im Werk und bei Lieferanten, Problembehandlung, Management und Projektarbeit

Beleuchtungs-, Elektroinstallations- und Automations-Systeme:

• Ländervertretung für die Türkei von Gira, Deutschland / Gewiss und Gi Zeta, Italien
• Marktforschung, Marktsegmentierung, Preiserstellung, Marketing Mix
• Planung und Durchführung von Messeaktivitäten, Vertriebsleitung
• Präsentationen von Produkten, Systemen und Lösungen für Architekten, Elektroinstallateure, Baufirmen
• Entwicklung von Fachhändlern und Großkunden auf nationaler Ebene
• Personalauswahlverfahren, Training, Coaching, Sales Leadership
• EIB European Installation Bus Projekte - Projektierung und Inbetriebnahme

Aluminum and steel production and packaging material processing:

Engineering Project Management:

• Coordinated Engineering Department in electro-mechanical installations (motors, drivers, aluminum mills, production measurement & control systems, industrial automation products,cabling, instrumentation, new machines, etc.) and maintenance of mills automation and control systems.

Capital Investment Project Management:

• Managed capital investment projects with a budget of 25,000,000 USD including purchasing and installing the first 2000 mm continuous thin aluminum casting line made in USA in the world to the new plant, purchasing, deinstallation, shipping, installation and commissioning of 3 used aluminum mills from Japan.
• One month trainingin Measurex Co (Honeywell) in Silicon Valley - USA for the X-Ray Continuous Thickness Measurement and Production Mill Control System.
• Expert Certification obtained.
• Installed the systems on 4 aluminum mills, commissioned production lines & trained operators.

Modernisation / Innovation Project Management:

• Improved the cooling system offered by the manufacturer as an innovation in this field, dropped the number of f ilters for 3 mills from 3 to 1, saving around 150,000 USD in initial investment, plus running costs through innovation.
• Prepared improvement project and obtained 400,000 USD grant from World Bank for CFC (Cloro Flora Carbon) conversion of aluminum sandwich panel production line.

Aluminium- und Stahlproduktion und Verarbeitung, Verpackungsmaterial:

• Weltweite Suche von Produktionsstättemaschinen, Erwerben, Installation und Inbetriebnahme (inklusive Motoren, Kontrollern, Messungs- und Automationssystemen wie z.B. X-Ray Dickensmessungssysteme)
• Umsetzung der Modernisierungsprojekte der Anlagen inklusive internationaler Financing Projekte mit IFC and WORLDBANK
• Unterstützte Engineering in Installationen, Automation und Steuerung für Produktionsanlagen 

Aluminium- und Stahlproduktion und Verarbeitung, Verpackungsmaterial:

• Weltweite Suche von Produktionsstättemaschinen, Erwerben, Installation und Inbetriebnahme (inklusive Motoren, Kontrollern, Messungs- und Automationssystemen wie z.B. X-Ray Dickensmessungssysteme)
• Umsetzung der Modernisierungsprojekte der Anlagen inklusive internationaler Financing Projekte mit IFC and WORLDBANK
• Unterstützte Engineering in Installationen, Automation und Steuerung für Produktionsanlagen 

• Total Quality Management, used ISO-9000 Series in German, English and Turkish
• Technical standardisation of production and quality procedures
• Prepared for and obtained Quality System Certification by TUV and TSE 
• Training and supervision of quality control inspectors, provided leadership and management
• Internal Quality Auditor Certification from Siemens
• Internal audit of UPS Uninterrupted Power Supply production plant of Siemens
• Supplier Quality Audit, Supplier Development Program
• Process Quality Control
• Module Test, System Test, Final Tests
• Incoming Material Quality Control, Visual Control

Hersteller von Digital Telephone Exchanges, PCB Printed Circuit Board, Kabelkonfektionen:
Ingenieur für Qualitätssicherung und -kontrolle:

• Umsetzung eines Total Quality Management Systems
• ISO-9000-Series in Deutsch, Englisch und Türkisch
• Schulung und Führung der Qualitätskontroll-Inspektoren
• Verbesserung und Dokumentierung von Materialeingangskontrolle
• Prozess-Kontrolle, Modul- und Systemtest Stationen
• ISO-9000 internal Qualitätsauditor Zertifizierung von Siemens
• Interne Audit der UPS Unterbrechungsfreie Stromversorgung Produktionsstätte
• Lieferanten Qualitätsaudit, Lieferanten Qualitätsentwicklung Programm

Hersteller von Digital Telephone Exchanges, PCB Printed Circuit Board, Kabelkonfektionen:

• Umsetzung eines Total Quality Management Systems
• ISO-9000-Series in Deutsch, Englisch und Türkisch
• Schulung und Führung der Qualitätskontroll-Inspektoren
• Verbesserung und Dokumentierung von Materialeingangskontrolle
• Prozess-Kontrolle, Modul- und Systemtest Stationen
• ISO-9000 internal Qualitätsauditor Zertifizierung von Siemens
• Interne Audit der UPS Unterbrechungsfreie Stromversorgung Produktionsstätte
• Lieferanten Qualitätsaudit, Lieferanten Qualitätsentwicklung Programm