SAP SD,TM , SAP CRM,SAP ARIBA, SAP ABAP,Successfactors,SAP CPI/HCI,SAP PI/PO, SAP BPM
Aktualisiert am 02.12.2020
Profil
Freiberufler / Selbstständiger
Verfügbar ab: 30.12.2020
Verfügbar zu: 100%
davon vor Ort: 100%
SAP CPI/HCI/ , SAPPI/PO, SAP CRM, SAP ARIBA,
English
written and Spoken
German
A2
Hindi
written and Spoken
Telugu
written and Spoken

Einsatzorte

Einsatzorte

Frankfurt am Main (+500km) Munich (+500km) Berlin (+50km) Hamburg (+500km) Hannover (+500km) Netherlands (+500km) Dresden (+500km) Kolin (+500km) Essen, Ruhr (+500km) Dortmund (+500km)

Available immediately

nicht möglich

Projekte

Projekte

1 Jahr 4 Monate
2018-01 - 2019-04

Background

Lead Consultant
Lead Consultant

As a Lead Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement


Deliverables
REST interface IFW <–> ECC:

IFW Caborders interface will sends caborder id value in GET operation of REST adapter and SAP ECC provides response for Id information back to IFW in JSON format using SAP PI system in between.


REST interface IFW <–> ECC:

IFW Sales orgnization interface will sends Salesorg and Client code values in GET operation of REST adapter and SAP ECC provides response for Id information back to IFW in JSON format using SAP PI system in between.

Token Inserting:

Inserting IFW token in ValueMappingReplication table in Cache Monitor to optimizie performence in Mapping rutime for all the token based interfaces in Schneider SAP PI
systems.

Migration:

Migrations from PI 7.1 Dual stack to PI 7.4 Dual stack for Iberia
Redesigning of ccBPM scenarios for Iberia.

Schneider Electric
1 Jahr 4 Monate
2016-09 - 2017-12

Performed Unit Testing and developed Technical specs as per requirement

Senior Consultant
Senior Consultant

Background
ARM is the industry's leading supplier of microprocessor technology, offering the widest range of microprocessor cores to address the performance, power, and cost requirements for almost all application markets. Combining a vibrant ecosystem with over 1,000 partners delivering silicon, development tools and software. ARM truly is “The Architecture for the Digital World. This project scope will entail the replacement of the existing CRM ORACLE OnDemand, with S Dynamics CRM. Where there is opportunity to improve process, or address identified areas for improvement. The current development strategy involves with MS Dynamics CRM Implementation and the integration between the MS-CRM system, SAP-ECC systems and SAP PO system in-between, to handle all the day to day operations very effectively in the business landscape.

Responsibilities

  • As a PI Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement


Deliverables

Implementation:
InterfaceExchangeRate SAPECC– BM:

ExchangeRate information sends through Outbound
proxies from SAP ECC and Big Machines receives the SOAP message using SAP PO system in between.


InterfacePriceBook SAPECC– MSCRM:

PriceBook information sends through Outbound
proxies from SAP ECC and MS CRM receives the JSON message (REST Adapter) using SAP PO system in between.


SuccessFactors LMS Curricula with SAP HCM Qualification:

The integration content allows recurring transfer of changed and new curricula catalog(Synchronization) from SuccessFactors
LMS to SAP HCM using SAP HCI.

ARM Holdings
3 Jahre 1 Monat
2013-09 - 2016-09

Performed Unit Testing and developed Technical specs as per requirement Deliverables

Associate Technical Analyst
Associate Technical Analyst

Background
Ford Technology Services India (FTSI) is a wholly owned subsidiary of Ford Motor Company, USA. It is an integral part of Ford's strategy to build and strengthen Information Technology and Engineering capability in Asia Pacific to support the aggressive corporate growth objectives in the region. FTSI also provides additional capacity for IT systems development / maintenance and Engineering Services support when customer demand exceeds the capacity to deliver in other major regions like North America and Europe. Asia Pacific and Africa (APA) region encompasses 11 markets. Our Asia Pacific and Africa (APA) region encompasses 11 markets – Australia, New Zealand, Japan, China, Taiwan, India, Thailand, Indonesia, the Philippines, Vietnam and South Africa – on three continents. The fastest-growing markets for automobiles are in rapidly developing countries like China and India. The current development strategy involves in FORD APAwith Upgrade Project, Implementation Project and Rollout Project. The integration between the SAP-CRM system,non-SAP systems and PI system in-between, to handle all the day to day operations very effectively in the business landscape.


Responsibilities

  • As a PI Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement Deliverables


Migration Project:
Migrations from PI 7.4 Dual stack to PO 7.4 Single stack.
Worked on Migration project along with Rollout project developments


Upgrade Project:
Worked on Upgrade project along with Rollout project developments. Upgraded from PI 7.0 to PI 7.4 dual stack.


Lincoln-China – Implementation:
InterfaceDragonfly – SAPCRM:

Dragonfly files consist of BP &Lead transactions information
sent to SAP CRM through Inbound proxyusing SAP PI system in between.


InterfaceSAPCRM -- DMS:

It is file extraction programme from SAPCRM and placed in CRM drop zone and SAP PI picks the files send it to Dealer Management Systems.


Interface DMS – SAPCRM:

DMS places a file in NAS drop zone and SAP PI picks the file and sent to CRM.


Servis2-CRM interface:

Ford Asia Pacific's Warranty claim processing system will provide
Customer Detail changes to SAPCRM system. Servis2 places file in NAS drop zone and SAP PI picks the file send to SAP CRMthrough IDOCs ZSBP001.ZSBP00101_1,ZSBV001.ZSBV00101.


Vincent: implementation:
Web service interface CPA:

Smart Vincent is application which will consume SAP CRM web
service through SAP PI with WSL Cookie Authentication for Customer Primary Address Retrieve web service. Java Mapping is used for WSL Cookie Authentication, SOAPtoXML, XMLtoSOAP.


Batch Load Interface:

It is file extraction programme from SAPCRM and placed in CRM drop zone and SAP PI picks the files send it to internal reader of mainframe system through OS Commands in SAP PI.

ASEAN – Rollout:
THAILAND Vehicle Data Migration Interface:

This interfaced used to load the VINs Data in SAP CRM system usingFILE upload programme and creating reference product with help of RFC functionmodule (ZRFC_CRMIF_CFF_IN_OUT_XICALL) &Creating a Vehicle IDOCs  in SAPCRM along with Handling Thailand & Chinese characters.

GOLDD Interface:

Worked on Encryption & Decryption for GOLDD Interface is handled in SAP PI. Decrypted GOLDD file is sent to SAP CRM through IDOCs to create New
Dealers information. Javamapping is used in this interface to construct xml from decrypted file to processes for Business Partner IDOCs.

FTSI (FORD APA - CRM Next Applications)
6 Monate
2012-08 - 2013-01

developed and supported Scenarios

Consultant
Consultant

Background
Dedicated Freight Corridor Corporation of India (DFCCIL) is a Special Purpose Vehicle set up under the administrative control of Ministry of Railways to undertake planning & development, mobilization of financial resources and construction, maintenance and operation of the Dedicated Freight Corridors. The mission of DFCCIL is to build a corridor with appropriate technology that enables Indian railways to regain its market share of freight transport by creating additional capacity and guaranteeing efficient, reliable, safe and cheaper options for mobility to its customers. The current development strategy involves the integration between the GIS system, ECC system and PI system in-between, to handle all the day to day operations very effectively in the business landscape.


Responsibilities

  • As a PI Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement


Deliverables
Integration of SAP with GIS for Enterprise Asset Management:
IDOC IORDER will be sent from the ECC application system to the GIS system using PI system
in between. GIS ID will be maintained both in GIS and Asset master in SAP and GIS ID is a
unique number.


Integration of SAP with GIS for Project Management System:
The master will be maintained in SAP and will be replicated in GIS.Contract Details, Record of works and Progress Analysis will be available in GIS with reference to plant (CPM office) in
SAP which will be the key field to have integration at both the places.

DFCCIL
8 Monate
2011-12 - 2012-07

Developed an Interface using DB2

Consultant
Consultant

Background
Idaho Power Company is an electric utility engaged in the generation, transmission,distribution, sale and purchase of electric energy and is regulated by the Federal Energy Regulatory Commission (FERC) and the state regulatory commissions of Idaho and Oregon.With headquarters in
Boise, Idaho, and an employee base of approximately 2,000 people.Itsvision is "To be regarded as an exceptional utility".
The current development strategy involves the integration between the Third-party system, File system which is still being used to house data and ECC, using TIBCO and PI in-between, to handle all the day to day operations very effectively in the business landscape.


Responsibilities

  • As a PI Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement


Deliverables

  • Developed an Interface using DB2 (JDBC Adapter) as Receiver and Generated an Outbound Client Proxy in ECC as Sender, PI system as middleware in between through asynchronous communication. ABAP programming is developed along with interface build.
  • Developed a report for Outage Interface from the Dialer to SAP ECC. This report uploads file  Create Customer Contacts from Planned Outage Dialler Calls list entries to SAP that are processed during the day. A contact is updated each Business Partner in the inbound files reflecting the call result.
IPC
6 Monate
2011-06 - 2011-11

OUTBOUND CLIENT PROXY

Consultant
Consultant

Background
Shire is one of the most admired global specialty biopharmaceutical companies in the world. Shire’s purpose is enable people with life-altering conditions to lead better lives. The key products of Shire are Vyvanse, intuniv, EQUASYM XL, Lialda,FOSRENOL, etc. Driving growth from balanced portfolio of key products and Developing, advancing and enhancing shire’s strong pipeline.Shire Today is Market capitalization: £ 9.3 billion*; $ 14.9 billion*. The current development strategy involves the integration between the File system which is still being used to house data and R/3, using UC/4 and PI in-between, to handle all the day to day operations very effectively in the business landscape.


Responsibilities

  • As a PI Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement


Deliverables

  • It’s an OUTBOUND CLIENT PROXY developed in ABAP and PI . Invistics Product Supply which will be having two files which will be transmitted from SAP R/3 to another third part system based on the two radio button options namely INVENTORY MOVEMENT and STOCK INFORMATION files. ABAP programming is developed along with interface build.
  • It’s an OUTBOUND CLIENT PROXY developed in ABAP and PI . FI Customer Payments will be having Customer payments information of ROSS and Non-ROSS customers. The Customer Payments File should be transmit from R/3 will be only ROSS Customer Payments. ABAP programming is developed along with interface build.
  • It’s an INBOUND IDOC developed in ABAP and PI. HGT Inventory Movement is having multiple Movement types ,increase qty, decreased qty of ROSS MV CD . Based on the ROSS MVCD respective tables are created and maintained in the ABAP, fetching SAP Movements types and multiple Transactions codes from that tables to process the Z_IDOC_Functional Module into the R/3. And also creation of Customized errors while passing information to INBOUND IDOC in R/3. ABAP programming is developed along with interface build.
Shire Pharmaceuticals Inc
1 Jahr 1 Monat
2010-05 - 2011-05

Developed Interface for Inventory Adjustments and Hold/Release Adjustment

Consultant
Consultant

Background
DSG international plc (formerly Dixons Group plc) is one of Europe's leading specialist electrical retailing groups. It operates throughout Europe and its bordering regions with more than
1,300 stores across the UK, Ireland, France, Spain, Italy, Hungary, Czech Republic, Greece and the Nordic region and operates successful e-commerce businesses in 27 countries across Europe. The current development strategy involves the integration between the Mainframe system which is still
being used to house data and ECC, using websphereMQ and PI in-between, to handle all the day to day operations very effectively in the business landscape.


Responsibilities

  • As a PI Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement


Deliverables

  • Developed Interface for Inventory Adjustments and Hold/Release Adjustment sent by the JMS then mapped to the IDOC WMMBID02. IDOC which is then forwarded to R3 system to create goods movements in SAP through PI system.
  • Developed Interface for Cancellation of SAP sales orders for Customer Orders. The input to this process the SAP system(ABAP Proxies) will take the order cancellation xml messages which are currently output from the eMerchant system through PI system .These cancellation messages trigger output to the Mainframe system through PI system.
  • Developed Interface for SAP to eMerachant and DSGi stats server of Stock on Hand update.Send the combined data to eMerchant and DSGi stats server through PI system.
DSGi
2 Jahre 6 Monate
2007-11 - 2010-04

Developed Interface File to IDOC with File Content Conversion at sender side using CSV.

Associate Consultant
Associate Consultant

Background
Electrica Banat is a supplier and distributor of electricity in the western Romanian region of Banat .Ness Implemented a SAP NetWeaver system at one of its eight subsidiaries related legacy
system, marking the IT Company's first implementation of version in Romania. The quick and successful implementation of the SAP NetWeaver platform not only lowered Electrica Banat's operating expenses, Reduced data transfer risk,erros,time and personnel but also increased the Higher company's value.


Responsibilities

  • As an Associate Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement.


Deliverables

  • Developed Interface IDOC to File with File Content Conversion at receiver side using CSV and placing the File on FTP.
  • Developed Interface File to IDOC with File Content Conversion at sender side using CSV.
  • Developed Interface File to HTTP, Dynamic File name using Adapter Specific Message Attributes.
  • Developed Interface objects and mapping objects in Integration Repository.
  • Message Monitoring in Integration Server and Runtime Workbench. Configured collaboration
    profiles, collaboration agreements and logical routings.
  • Developed new interfaces objects using the IDOC, FILE, HTTP adapters. Defined message
    mappings using Mapping Editor in XI.
Electrica Banat

Aus- und Weiterbildung

Aus- und Weiterbildung

QUALIFICATIONS

St.Patricks P.G College / Osmania University

Computer Science

Masters / MCA

Position

Position

SAP Solutions Architect and Integration Experience

  • Having 11 years of experience in SAP technologies: ABAP, ABAP-OO, Fiori / SAPUI5, SAP NetWeaver,SAP SD,TM, SAP HANA, SAP PI / PO, SAP Portal, SAP Solution Manager, SAP S / 4 HANA.

  • Develop a data model in SAC to provide the source data for calculating the KPIs.

  • Managed KPIs and Reports in Query Browse, View Browser, Custom Analytical Queries, APF Configuration Modeler application.

  • Key user point of contact & define Key Performance Indicators in Analytical SAP Fiori applications.

  • Analyze system & identify data sources containing contingent workforce data.

  • Develop future forecasts using Predictive Analytics.

    • Worked on SAP Cloud Platform Integration for SAP SuccessFactors Employee Central to Microsoft Active Directory integration.

    • Worked on CPI for SuccessFactor EC to HCM integration.

    • Worked on C4C and Success Factor EC to ERP and 3rd party integration with HCI.

    • Extensively working in cloud integration. As a part of cloud integration worked on user provisioning and authorization at cloud platform.

    • Working on configuration of standard APIs in Cloud integration tool. At the same tome worked on custom inflow development and deploying them.

    • Worked on SFTP, SOAP, HTTPs, and Success Factor Adapters.

    • Worked on deploying certificates in CPI and HCI.

    • Worked on unit testing and end to end testing, bug fixing and change management in CPI / HCI.

    • Hands on experience in working on mapping in CPI and HCI, writing groovy script and creating iflow for custom and test interfaces.

    • Involved in complete project lifecycle, from Requirements gathering, Design, Realization, and Go-live to after Go-live support.

    • Worked on PO 7.5, 7.4, 7.31, PI 7.3, PI 7.1 and 7.0 versions. Worked on interface related ABAP as well. Carries strong product knowledge in SAP PI and good analytical and consulting skills necessary to participate into requirement gathering / initial assessment and prepare Integration Roadmap.

    •  Developed interfaces on NetWeaver Developer studio (NWDS7.31) on NetWeaver 7.4 and have knowledge on NWDI.

    • Extensively worked on Retail (SD, MM, LE, FI, CO), Is-utilities, Pharmaceutical, EWM, POSDM, BW, CRM, SRM & SLC domain by A2A & B2B interface development for different customers.

    •  Have good work exposure on Webservice interfaces which involve ABAP proxy.

    •  Expert in Graphical mapping and have hands on experience in XSLT mapping. Have explored various node functions in graphical mapping; have built UDFs, implemented RFC & JDBC lookup.

    • Good work experience in ALE / IDOC, RFC function module, ABAP proxy coding, ABAP ALV report, enhancement and user exit.

    •  Mainly worked in implementation projects. For end to end implementations worked on technical specification preparation, development, unit testing, test case and configuration document preparation.

    • Proficient in working on technology Adapters like IDOC, IDOC_AAE, RFC, JMS, Mail, SOAP, XI, File, FTP, WS & HTTP adapters. Working with B2B scenario which involved AS2, OFTP and SFTP PGP adapters on B2B add-on. Good working experience in advanced adapter engine using integrated configuration. Have worked on few interfaces on JDBC and MDM adapters. Provided support in projects where RNIF and Advantco SFTP adapter were involved.

    • Experienced in ccBPM interfaces and NWBPM interafces.

    • Have worked on production support activates, monitoring in Runtime Workbench or configuration and monitoring home in PI monitoring tool, monitored in NWA and in R3 system as well. ABAP side monitoring for PI interfaces including BPE and queue monitoring. Handled cache problems and took part in troubleshooting activities. Trouble shooting expertise using the CCMS and other transactions.

    • Handle both file, CTS and CTS + transport on the basis of requirements.

    • Configured Alerts for Application Errors and triggered them in Business Scenarios for both single stack and dual stack environments.

    • Have knowledge on AMT.

Kompetenzen

Kompetenzen

Top-Skills

SAP CPI/HCI/ , SAPPI/PO, SAP CRM, SAP ARIBA,

Produkte / Standards / Erfahrungen / Methoden

SAP Solutions Architect and Integration Experience

  • Having 10 years of experience in SAP technologies: ABAP, ABAP-OO, Fiori / SAPUI5, SAP NetWeaver, SAP HANA, SAP PI / PO, SAP Portal, SAP Solution Manager, SAP S / 4 HANA,SAP SD,SAP TM

  • Develop a data model in SAC to provide the source data for calculating the KPIs.

  • Managed KPIs and Reports in Query Browse, View Browser, Custom Analytical Queries, APF Configuration Modeler application.

  • Key user point of contact & define Key Performance Indicators in Analytical SAP Fiori applications.

  • Analyze system & identify data sources containing contingent workforce data.

  • Develop future forecasts using Predictive Analytics.

    • Worked on SAP Cloud Platform Integration for SAP SuccessFactors Employee Central to Microsoft Active Directory integration.

    • Worked on CPI for SuccessFactor EC to HCM integration.

    • Worked on C4C and Success Factor EC to ERP and 3rd party integration with HCI.

    • Extensively working in cloud integration. As a part of cloud integration worked on user provisioning and authorization at cloud platform.

    • Working on configuration of standard APIs in Cloud integration tool. At the same tome worked on custom inflow development and deploying them.

    • Worked on SFTP, SOAP, HTTPs, and Success Factor Adapters.

    • Worked on deploying certificates in CPI and HCI.

    • Worked on unit testing and end to end testing, bug fixing and change management in CPI / HCI.

    • Hands on experience in working on mapping in CPI and HCI, writing groovy script and creating iflow for custom and test interfaces.

    • Involved in complete project lifecycle, from Requirements gathering, Design, Realization, and Go-live to after Go-live support.

    • Worked on PO 7.5, 7.4, 7.31, PI 7.3, PI 7.1 and 7.0 versions. Worked on interface related ABAP as well. Carries strong product knowledge in SAP PI and good analytical and consulting skills necessary to participate into requirement gathering / initial assessment and prepare Integration Roadmap.

    •  Developed interfaces on NetWeaver Developer studio (NWDS7.31) on NetWeaver 7.4 and have knowledge on NWDI.

    • Extensively worked on Retail (SD, MM, LE, FI, CO), Is-utilities, Pharmaceutical, EWM, POSDM, BW, CRM, SRM & SLC domain by A2A & B2B interface development for different customers.

    •  Have good work exposure on Webservice interfaces which involve ABAP proxy.

    •  Expert in Graphical mapping and have hands on experience in XSLT mapping. Have explored various node functions in graphical mapping; have built UDFs, implemented RFC & JDBC lookup.

    • Good work experience in ALE / IDOC, RFC function module, ABAP proxy coding, ABAP ALV report, enhancement and user exit.

    •  Mainly worked in implementation projects. For end to end implementations worked on technical specification preparation, development, unit testing, test case and configuration document preparation.

    • Proficient in working on technology Adapters like IDOC, IDOC_AAE, RFC, JMS, Mail, SOAP, XI, File, FTP, WS & HTTP adapters. Working with B2B scenario which involved AS2, OFTP and SFTP PGP adapters on B2B add-on. Good working experience in advanced adapter engine using integrated configuration. Have worked on few interfaces on JDBC and MDM adapters. Provided support in projects where RNIF and Advantco SFTP adapter were involved.

    • Experienced in ccBPM interfaces and NWBPM interafces.

    • Have worked on production support activates, monitoring in Runtime Workbench or configuration and monitoring home in PI monitoring tool, monitored in NWA and in R3 system as well. ABAP side monitoring for PI interfaces including BPE and queue monitoring. Handled cache problems and took part in troubleshooting activities. Trouble shooting expertise using the CCMS and other transactions.

    • Handle both file, CTS and CTS + transport on the basis of requirements.

    • Configured Alerts for Application Errors and triggered them in Business Scenarios for both single stack and dual stack environments.

    • Have knowledge on AMT.

Einsatzorte

Einsatzorte

Frankfurt am Main (+500km) Munich (+500km) Berlin (+50km) Hamburg (+500km) Hannover (+500km) Netherlands (+500km) Dresden (+500km) Kolin (+500km) Essen, Ruhr (+500km) Dortmund (+500km)

Available immediately

nicht möglich

Projekte

Projekte

1 Jahr 4 Monate
2018-01 - 2019-04

Background

Lead Consultant
Lead Consultant

As a Lead Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement


Deliverables
REST interface IFW <–> ECC:

IFW Caborders interface will sends caborder id value in GET operation of REST adapter and SAP ECC provides response for Id information back to IFW in JSON format using SAP PI system in between.


REST interface IFW <–> ECC:

IFW Sales orgnization interface will sends Salesorg and Client code values in GET operation of REST adapter and SAP ECC provides response for Id information back to IFW in JSON format using SAP PI system in between.

Token Inserting:

Inserting IFW token in ValueMappingReplication table in Cache Monitor to optimizie performence in Mapping rutime for all the token based interfaces in Schneider SAP PI
systems.

Migration:

Migrations from PI 7.1 Dual stack to PI 7.4 Dual stack for Iberia
Redesigning of ccBPM scenarios for Iberia.

Schneider Electric
1 Jahr 4 Monate
2016-09 - 2017-12

Performed Unit Testing and developed Technical specs as per requirement

Senior Consultant
Senior Consultant

Background
ARM is the industry's leading supplier of microprocessor technology, offering the widest range of microprocessor cores to address the performance, power, and cost requirements for almost all application markets. Combining a vibrant ecosystem with over 1,000 partners delivering silicon, development tools and software. ARM truly is “The Architecture for the Digital World. This project scope will entail the replacement of the existing CRM ORACLE OnDemand, with S Dynamics CRM. Where there is opportunity to improve process, or address identified areas for improvement. The current development strategy involves with MS Dynamics CRM Implementation and the integration between the MS-CRM system, SAP-ECC systems and SAP PO system in-between, to handle all the day to day operations very effectively in the business landscape.

Responsibilities

  • As a PI Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement


Deliverables

Implementation:
InterfaceExchangeRate SAPECC– BM:

ExchangeRate information sends through Outbound
proxies from SAP ECC and Big Machines receives the SOAP message using SAP PO system in between.


InterfacePriceBook SAPECC– MSCRM:

PriceBook information sends through Outbound
proxies from SAP ECC and MS CRM receives the JSON message (REST Adapter) using SAP PO system in between.


SuccessFactors LMS Curricula with SAP HCM Qualification:

The integration content allows recurring transfer of changed and new curricula catalog(Synchronization) from SuccessFactors
LMS to SAP HCM using SAP HCI.

ARM Holdings
3 Jahre 1 Monat
2013-09 - 2016-09

Performed Unit Testing and developed Technical specs as per requirement Deliverables

Associate Technical Analyst
Associate Technical Analyst

Background
Ford Technology Services India (FTSI) is a wholly owned subsidiary of Ford Motor Company, USA. It is an integral part of Ford's strategy to build and strengthen Information Technology and Engineering capability in Asia Pacific to support the aggressive corporate growth objectives in the region. FTSI also provides additional capacity for IT systems development / maintenance and Engineering Services support when customer demand exceeds the capacity to deliver in other major regions like North America and Europe. Asia Pacific and Africa (APA) region encompasses 11 markets. Our Asia Pacific and Africa (APA) region encompasses 11 markets – Australia, New Zealand, Japan, China, Taiwan, India, Thailand, Indonesia, the Philippines, Vietnam and South Africa – on three continents. The fastest-growing markets for automobiles are in rapidly developing countries like China and India. The current development strategy involves in FORD APAwith Upgrade Project, Implementation Project and Rollout Project. The integration between the SAP-CRM system,non-SAP systems and PI system in-between, to handle all the day to day operations very effectively in the business landscape.


Responsibilities

  • As a PI Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement Deliverables


Migration Project:
Migrations from PI 7.4 Dual stack to PO 7.4 Single stack.
Worked on Migration project along with Rollout project developments


Upgrade Project:
Worked on Upgrade project along with Rollout project developments. Upgraded from PI 7.0 to PI 7.4 dual stack.


Lincoln-China – Implementation:
InterfaceDragonfly – SAPCRM:

Dragonfly files consist of BP &Lead transactions information
sent to SAP CRM through Inbound proxyusing SAP PI system in between.


InterfaceSAPCRM -- DMS:

It is file extraction programme from SAPCRM and placed in CRM drop zone and SAP PI picks the files send it to Dealer Management Systems.


Interface DMS – SAPCRM:

DMS places a file in NAS drop zone and SAP PI picks the file and sent to CRM.


Servis2-CRM interface:

Ford Asia Pacific's Warranty claim processing system will provide
Customer Detail changes to SAPCRM system. Servis2 places file in NAS drop zone and SAP PI picks the file send to SAP CRMthrough IDOCs ZSBP001.ZSBP00101_1,ZSBV001.ZSBV00101.


Vincent: implementation:
Web service interface CPA:

Smart Vincent is application which will consume SAP CRM web
service through SAP PI with WSL Cookie Authentication for Customer Primary Address Retrieve web service. Java Mapping is used for WSL Cookie Authentication, SOAPtoXML, XMLtoSOAP.


Batch Load Interface:

It is file extraction programme from SAPCRM and placed in CRM drop zone and SAP PI picks the files send it to internal reader of mainframe system through OS Commands in SAP PI.

ASEAN – Rollout:
THAILAND Vehicle Data Migration Interface:

This interfaced used to load the VINs Data in SAP CRM system usingFILE upload programme and creating reference product with help of RFC functionmodule (ZRFC_CRMIF_CFF_IN_OUT_XICALL) &Creating a Vehicle IDOCs  in SAPCRM along with Handling Thailand & Chinese characters.

GOLDD Interface:

Worked on Encryption & Decryption for GOLDD Interface is handled in SAP PI. Decrypted GOLDD file is sent to SAP CRM through IDOCs to create New
Dealers information. Javamapping is used in this interface to construct xml from decrypted file to processes for Business Partner IDOCs.

FTSI (FORD APA - CRM Next Applications)
6 Monate
2012-08 - 2013-01

developed and supported Scenarios

Consultant
Consultant

Background
Dedicated Freight Corridor Corporation of India (DFCCIL) is a Special Purpose Vehicle set up under the administrative control of Ministry of Railways to undertake planning & development, mobilization of financial resources and construction, maintenance and operation of the Dedicated Freight Corridors. The mission of DFCCIL is to build a corridor with appropriate technology that enables Indian railways to regain its market share of freight transport by creating additional capacity and guaranteeing efficient, reliable, safe and cheaper options for mobility to its customers. The current development strategy involves the integration between the GIS system, ECC system and PI system in-between, to handle all the day to day operations very effectively in the business landscape.


Responsibilities

  • As a PI Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement


Deliverables
Integration of SAP with GIS for Enterprise Asset Management:
IDOC IORDER will be sent from the ECC application system to the GIS system using PI system
in between. GIS ID will be maintained both in GIS and Asset master in SAP and GIS ID is a
unique number.


Integration of SAP with GIS for Project Management System:
The master will be maintained in SAP and will be replicated in GIS.Contract Details, Record of works and Progress Analysis will be available in GIS with reference to plant (CPM office) in
SAP which will be the key field to have integration at both the places.

DFCCIL
8 Monate
2011-12 - 2012-07

Developed an Interface using DB2

Consultant
Consultant

Background
Idaho Power Company is an electric utility engaged in the generation, transmission,distribution, sale and purchase of electric energy and is regulated by the Federal Energy Regulatory Commission (FERC) and the state regulatory commissions of Idaho and Oregon.With headquarters in
Boise, Idaho, and an employee base of approximately 2,000 people.Itsvision is "To be regarded as an exceptional utility".
The current development strategy involves the integration between the Third-party system, File system which is still being used to house data and ECC, using TIBCO and PI in-between, to handle all the day to day operations very effectively in the business landscape.


Responsibilities

  • As a PI Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement


Deliverables

  • Developed an Interface using DB2 (JDBC Adapter) as Receiver and Generated an Outbound Client Proxy in ECC as Sender, PI system as middleware in between through asynchronous communication. ABAP programming is developed along with interface build.
  • Developed a report for Outage Interface from the Dialer to SAP ECC. This report uploads file  Create Customer Contacts from Planned Outage Dialler Calls list entries to SAP that are processed during the day. A contact is updated each Business Partner in the inbound files reflecting the call result.
IPC
6 Monate
2011-06 - 2011-11

OUTBOUND CLIENT PROXY

Consultant
Consultant

Background
Shire is one of the most admired global specialty biopharmaceutical companies in the world. Shire’s purpose is enable people with life-altering conditions to lead better lives. The key products of Shire are Vyvanse, intuniv, EQUASYM XL, Lialda,FOSRENOL, etc. Driving growth from balanced portfolio of key products and Developing, advancing and enhancing shire’s strong pipeline.Shire Today is Market capitalization: £ 9.3 billion*; $ 14.9 billion*. The current development strategy involves the integration between the File system which is still being used to house data and R/3, using UC/4 and PI in-between, to handle all the day to day operations very effectively in the business landscape.


Responsibilities

  • As a PI Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement


Deliverables

  • It’s an OUTBOUND CLIENT PROXY developed in ABAP and PI . Invistics Product Supply which will be having two files which will be transmitted from SAP R/3 to another third part system based on the two radio button options namely INVENTORY MOVEMENT and STOCK INFORMATION files. ABAP programming is developed along with interface build.
  • It’s an OUTBOUND CLIENT PROXY developed in ABAP and PI . FI Customer Payments will be having Customer payments information of ROSS and Non-ROSS customers. The Customer Payments File should be transmit from R/3 will be only ROSS Customer Payments. ABAP programming is developed along with interface build.
  • It’s an INBOUND IDOC developed in ABAP and PI. HGT Inventory Movement is having multiple Movement types ,increase qty, decreased qty of ROSS MV CD . Based on the ROSS MVCD respective tables are created and maintained in the ABAP, fetching SAP Movements types and multiple Transactions codes from that tables to process the Z_IDOC_Functional Module into the R/3. And also creation of Customized errors while passing information to INBOUND IDOC in R/3. ABAP programming is developed along with interface build.
Shire Pharmaceuticals Inc
1 Jahr 1 Monat
2010-05 - 2011-05

Developed Interface for Inventory Adjustments and Hold/Release Adjustment

Consultant
Consultant

Background
DSG international plc (formerly Dixons Group plc) is one of Europe's leading specialist electrical retailing groups. It operates throughout Europe and its bordering regions with more than
1,300 stores across the UK, Ireland, France, Spain, Italy, Hungary, Czech Republic, Greece and the Nordic region and operates successful e-commerce businesses in 27 countries across Europe. The current development strategy involves the integration between the Mainframe system which is still
being used to house data and ECC, using websphereMQ and PI in-between, to handle all the day to day operations very effectively in the business landscape.


Responsibilities

  • As a PI Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement


Deliverables

  • Developed Interface for Inventory Adjustments and Hold/Release Adjustment sent by the JMS then mapped to the IDOC WMMBID02. IDOC which is then forwarded to R3 system to create goods movements in SAP through PI system.
  • Developed Interface for Cancellation of SAP sales orders for Customer Orders. The input to this process the SAP system(ABAP Proxies) will take the order cancellation xml messages which are currently output from the eMerchant system through PI system .These cancellation messages trigger output to the Mainframe system through PI system.
  • Developed Interface for SAP to eMerachant and DSGi stats server of Stock on Hand update.Send the combined data to eMerchant and DSGi stats server through PI system.
DSGi
2 Jahre 6 Monate
2007-11 - 2010-04

Developed Interface File to IDOC with File Content Conversion at sender side using CSV.

Associate Consultant
Associate Consultant

Background
Electrica Banat is a supplier and distributor of electricity in the western Romanian region of Banat .Ness Implemented a SAP NetWeaver system at one of its eight subsidiaries related legacy
system, marking the IT Company's first implementation of version in Romania. The quick and successful implementation of the SAP NetWeaver platform not only lowered Electrica Banat's operating expenses, Reduced data transfer risk,erros,time and personnel but also increased the Higher company's value.


Responsibilities

  • As an Associate Consultant developed and supported Scenarios as per client requirement. Performed Unit Testing and developed Technical specs as per requirement.


Deliverables

  • Developed Interface IDOC to File with File Content Conversion at receiver side using CSV and placing the File on FTP.
  • Developed Interface File to IDOC with File Content Conversion at sender side using CSV.
  • Developed Interface File to HTTP, Dynamic File name using Adapter Specific Message Attributes.
  • Developed Interface objects and mapping objects in Integration Repository.
  • Message Monitoring in Integration Server and Runtime Workbench. Configured collaboration
    profiles, collaboration agreements and logical routings.
  • Developed new interfaces objects using the IDOC, FILE, HTTP adapters. Defined message
    mappings using Mapping Editor in XI.
Electrica Banat

Aus- und Weiterbildung

Aus- und Weiterbildung

QUALIFICATIONS

St.Patricks P.G College / Osmania University

Computer Science

Masters / MCA

Position

Position

SAP Solutions Architect and Integration Experience

  • Having 11 years of experience in SAP technologies: ABAP, ABAP-OO, Fiori / SAPUI5, SAP NetWeaver,SAP SD,TM, SAP HANA, SAP PI / PO, SAP Portal, SAP Solution Manager, SAP S / 4 HANA.

  • Develop a data model in SAC to provide the source data for calculating the KPIs.

  • Managed KPIs and Reports in Query Browse, View Browser, Custom Analytical Queries, APF Configuration Modeler application.

  • Key user point of contact & define Key Performance Indicators in Analytical SAP Fiori applications.

  • Analyze system & identify data sources containing contingent workforce data.

  • Develop future forecasts using Predictive Analytics.

    • Worked on SAP Cloud Platform Integration for SAP SuccessFactors Employee Central to Microsoft Active Directory integration.

    • Worked on CPI for SuccessFactor EC to HCM integration.

    • Worked on C4C and Success Factor EC to ERP and 3rd party integration with HCI.

    • Extensively working in cloud integration. As a part of cloud integration worked on user provisioning and authorization at cloud platform.

    • Working on configuration of standard APIs in Cloud integration tool. At the same tome worked on custom inflow development and deploying them.

    • Worked on SFTP, SOAP, HTTPs, and Success Factor Adapters.

    • Worked on deploying certificates in CPI and HCI.

    • Worked on unit testing and end to end testing, bug fixing and change management in CPI / HCI.

    • Hands on experience in working on mapping in CPI and HCI, writing groovy script and creating iflow for custom and test interfaces.

    • Involved in complete project lifecycle, from Requirements gathering, Design, Realization, and Go-live to after Go-live support.

    • Worked on PO 7.5, 7.4, 7.31, PI 7.3, PI 7.1 and 7.0 versions. Worked on interface related ABAP as well. Carries strong product knowledge in SAP PI and good analytical and consulting skills necessary to participate into requirement gathering / initial assessment and prepare Integration Roadmap.

    •  Developed interfaces on NetWeaver Developer studio (NWDS7.31) on NetWeaver 7.4 and have knowledge on NWDI.

    • Extensively worked on Retail (SD, MM, LE, FI, CO), Is-utilities, Pharmaceutical, EWM, POSDM, BW, CRM, SRM & SLC domain by A2A & B2B interface development for different customers.

    •  Have good work exposure on Webservice interfaces which involve ABAP proxy.

    •  Expert in Graphical mapping and have hands on experience in XSLT mapping. Have explored various node functions in graphical mapping; have built UDFs, implemented RFC & JDBC lookup.

    • Good work experience in ALE / IDOC, RFC function module, ABAP proxy coding, ABAP ALV report, enhancement and user exit.

    •  Mainly worked in implementation projects. For end to end implementations worked on technical specification preparation, development, unit testing, test case and configuration document preparation.

    • Proficient in working on technology Adapters like IDOC, IDOC_AAE, RFC, JMS, Mail, SOAP, XI, File, FTP, WS & HTTP adapters. Working with B2B scenario which involved AS2, OFTP and SFTP PGP adapters on B2B add-on. Good working experience in advanced adapter engine using integrated configuration. Have worked on few interfaces on JDBC and MDM adapters. Provided support in projects where RNIF and Advantco SFTP adapter were involved.

    • Experienced in ccBPM interfaces and NWBPM interafces.

    • Have worked on production support activates, monitoring in Runtime Workbench or configuration and monitoring home in PI monitoring tool, monitored in NWA and in R3 system as well. ABAP side monitoring for PI interfaces including BPE and queue monitoring. Handled cache problems and took part in troubleshooting activities. Trouble shooting expertise using the CCMS and other transactions.

    • Handle both file, CTS and CTS + transport on the basis of requirements.

    • Configured Alerts for Application Errors and triggered them in Business Scenarios for both single stack and dual stack environments.

    • Have knowledge on AMT.

Kompetenzen

Kompetenzen

Top-Skills

SAP CPI/HCI/ , SAPPI/PO, SAP CRM, SAP ARIBA,

Produkte / Standards / Erfahrungen / Methoden

SAP Solutions Architect and Integration Experience

  • Having 10 years of experience in SAP technologies: ABAP, ABAP-OO, Fiori / SAPUI5, SAP NetWeaver, SAP HANA, SAP PI / PO, SAP Portal, SAP Solution Manager, SAP S / 4 HANA,SAP SD,SAP TM

  • Develop a data model in SAC to provide the source data for calculating the KPIs.

  • Managed KPIs and Reports in Query Browse, View Browser, Custom Analytical Queries, APF Configuration Modeler application.

  • Key user point of contact & define Key Performance Indicators in Analytical SAP Fiori applications.

  • Analyze system & identify data sources containing contingent workforce data.

  • Develop future forecasts using Predictive Analytics.

    • Worked on SAP Cloud Platform Integration for SAP SuccessFactors Employee Central to Microsoft Active Directory integration.

    • Worked on CPI for SuccessFactor EC to HCM integration.

    • Worked on C4C and Success Factor EC to ERP and 3rd party integration with HCI.

    • Extensively working in cloud integration. As a part of cloud integration worked on user provisioning and authorization at cloud platform.

    • Working on configuration of standard APIs in Cloud integration tool. At the same tome worked on custom inflow development and deploying them.

    • Worked on SFTP, SOAP, HTTPs, and Success Factor Adapters.

    • Worked on deploying certificates in CPI and HCI.

    • Worked on unit testing and end to end testing, bug fixing and change management in CPI / HCI.

    • Hands on experience in working on mapping in CPI and HCI, writing groovy script and creating iflow for custom and test interfaces.

    • Involved in complete project lifecycle, from Requirements gathering, Design, Realization, and Go-live to after Go-live support.

    • Worked on PO 7.5, 7.4, 7.31, PI 7.3, PI 7.1 and 7.0 versions. Worked on interface related ABAP as well. Carries strong product knowledge in SAP PI and good analytical and consulting skills necessary to participate into requirement gathering / initial assessment and prepare Integration Roadmap.

    •  Developed interfaces on NetWeaver Developer studio (NWDS7.31) on NetWeaver 7.4 and have knowledge on NWDI.

    • Extensively worked on Retail (SD, MM, LE, FI, CO), Is-utilities, Pharmaceutical, EWM, POSDM, BW, CRM, SRM & SLC domain by A2A & B2B interface development for different customers.

    •  Have good work exposure on Webservice interfaces which involve ABAP proxy.

    •  Expert in Graphical mapping and have hands on experience in XSLT mapping. Have explored various node functions in graphical mapping; have built UDFs, implemented RFC & JDBC lookup.

    • Good work experience in ALE / IDOC, RFC function module, ABAP proxy coding, ABAP ALV report, enhancement and user exit.

    •  Mainly worked in implementation projects. For end to end implementations worked on technical specification preparation, development, unit testing, test case and configuration document preparation.

    • Proficient in working on technology Adapters like IDOC, IDOC_AAE, RFC, JMS, Mail, SOAP, XI, File, FTP, WS & HTTP adapters. Working with B2B scenario which involved AS2, OFTP and SFTP PGP adapters on B2B add-on. Good working experience in advanced adapter engine using integrated configuration. Have worked on few interfaces on JDBC and MDM adapters. Provided support in projects where RNIF and Advantco SFTP adapter were involved.

    • Experienced in ccBPM interfaces and NWBPM interafces.

    • Have worked on production support activates, monitoring in Runtime Workbench or configuration and monitoring home in PI monitoring tool, monitored in NWA and in R3 system as well. ABAP side monitoring for PI interfaces including BPE and queue monitoring. Handled cache problems and took part in troubleshooting activities. Trouble shooting expertise using the CCMS and other transactions.

    • Handle both file, CTS and CTS + transport on the basis of requirements.

    • Configured Alerts for Application Errors and triggered them in Business Scenarios for both single stack and dual stack environments.

    • Have knowledge on AMT.

Vertrauen Sie auf GULP

Im Bereich Freelancing
Im Bereich Arbeitnehmerüberlassung / Personalvermittlung

Fragen?

Rufen Sie uns an +49 89 500316-300 oder schreiben Sie uns:

Das GULP Freelancer-Portal

Direktester geht's nicht! Ganz einfach Freelancer finden und direkt Kontakt aufnehmen.